Main applications: Underground parking, garage, floor hallway, corridor indoor lighting, indoor lighting energy-saving renovation of the 24-hour lighting / full day lighting project.
01. Intelligent Sensing Method: PIR Sensor
02. Lamp Structures: Infrared sensors PIR, smart LED driver, LED fluorescent tube
03. Core Detector: NICERA PIR Sensor, Fresnel lens
04. Sensing Distance: Straight-line 6~8 Meters, Height 3~4 Meters, Suspension or Hanging sensing distance 8 meters.
05. Sensing Angle: 140°
06. Lighting Delay Time: 30 seconds, can adjust 35 seconds, 45 seconds, 60 seconds or different lighting delay time
07. Speed of Response: 0.3 seconds
08. Full Brightness Power: 20W
09. Micro-bright Dormant Power: 6W
Two Micro-bright Dormant Models
A: Power consumption can be adjusted to completely shut down, all lamps complete the shutdown after full brightness.
B: Power consumption can be adjusted to micro-bright sleep standby with different power, such as 2W,4W,5W...all lamps keep micro-bright conditions after full brightness.
10. LED Type: SMD 2835
11. Color Temperature: Warm White 2800K-3200K, Natural White 4000K-4500K, Pure White: 5000K-5500K, Cold White 6000K-6500K
12. Full Brightness Luminous Flux: 1625LM
13. Micro-bright Dormant Luminous Flux: 470LM, In accordance with the adjustment of the power of the set time , the recovery to 10%, 20 %, 30% the micro light luminous flux of the different brightness.
14. Input Voltage: AC190-240V, AC100-140V, Custom
15. Input Frequency: 50Hz, 60Hz
16. CRI: ≥70Ra
17. Sizes: (L)1198MM*(Dia.)26MM (not include the PIN length), (L)1212MM*(Dia.)26MM (include the PIN length)
18. Lamp Shape: Oval, circular (optional)
19. Beam Angle: 160°
20. Lamp Holder: T8 G13
21. Power Factor: PF≥0.9
22. Power Conversion Efficiency: ≥85%
23. Cover Material: Aluminum+PC Cover
24. Surface Color: Milk White, Frosted, Transparent
25. PCB Circuit Board Material: FR4 Fiberglass Circuit Boards
26. Working Temperature: -20℃~+40℃
27. Storage Temperature: -30°C~+50°C
28. Storage Humidity: 10%-90%RH
29. Life Span: ≥50000 Hours
30. Certificates: CE, RoHS
31. Warranty Period: 3 Years
1. Must cut off the power before installation. First check what drive fluorescent tubes. Electronic drive mode or inductors (coils) drive way? If electronic drive, To power apart originally connected with the electronic ballast, lamp and electronic ballast cable need to cut. If Inductance ( coil ) ballasts drive, you do not change the other lines, just remove the fluorescent tube and starter.
2. Before Formal alternative replacement installation, Neway Lighting remind-The voltage range of related installation to be completely in line with the use of LED sensor lamp voltage, then turn off the power switch , rotary remove the traditional lamp, open bracket cover, remove the electronic ballast and starter set to be confirmed.
3. Mains AC input zero, the Firewire two tap two bases, and good insulation measures (wiring head position wrapped electrical insulation tape), attention to the need for electrician knowledge of the safe operation of the staff, such as the user does not have operational knowledge of electrical safety shall call a professional electrician check the wiring is correct, replace the bracket cover (locking screw).
4. Mounted the same specifications length LED sensor lamp on the bracket, close the total switching power supply, open the replacement lamp switch can be energized lit lighting use
Warnings
1.Products does not apply to sealed unit with dimming lamps
2. Avoid installation in high-temperature heat sources, superheated steam, corrosive gases, high-calorie, high- humidity environment place District
3. Installation and removal of products, must power off to avoid the risk of electric shock
Application Cases
1.Suitable alternative energy saving reconstruction large EMC engineering:
Government agencies building lighting project, the factory lighting engineering, school energy-saving lighting engineering, underground parking garage | underground parking lighting engineering and expansion, the airport energy-saving lighting transformation, hotel lighting transformation, hospital lighting energy saving reconstruction, marketplace lighting engineering modification should be long hours every day or 24 hours lighting of large lighting energy saving place.
2. Main application fields:
24 hours lighting lighting area: area stairs, elevator swing, toilet, basement, hotel and office corridor corridor lamp, porch, warehouse, underground parking garage, underground aisle, subway lighting, become at present stage instead of long time (24 hours) work traditional induction fluorescent tube most ideal secondary energy-saving LED lighting products.
